Executables
|
|
|
Starter Kit (2,098,552 bytes) |
InstallShield (executable, ROMs and boot disks)
This is still Version 5.0.4. Download this to get the ROMS and
Boot Disks, then download the executable only (below) for the
new executable. If you want the full package download the FULL
Kit below.
|
|
Emulator executable
only (328,517 bytes) |
executable only (version 5.1.0)
|
|
Emulator executable with
images (4,140,435 bytes) |
Executable with ROMS, minimal diskette images
and configuration files. Install the full or starter kit and
then unzip this file into your SWTPCemu execution directory to
overlay with the latest and greatest version.
|
|
Floppy Maint (140,458 bytes)
|
DSK File Maintenance (Version 2.0.0)
|
|
GUI 6800 Assembler (30,841 bytes). |
6800 Assembler with IDE
|
|
FULL Kit (125,066,081 bytes)
|
contains everything that's on the FULL CD (Full VS 2010 version)
|
|
Cataloger for dsk files
(120,405 bytes) |
Catalog all of your .dsk files into Access mdb file
|
|
NetPC 3.4 |
Use DSK files on a PC as mounted drives on your Real
6809 hardware
|
|
NetPC 3.5 |
Use DSK files on a PC as mounted drives on your Real
6809 hardware
|
|
FLEXNet 4.2.1B |
Similar to NetPC but for Windows platform and
support for multiple diskette images mounted at the same time.
Added FDRIVE command to FNSRC.dsk file so that mapping does not
get trashed. Also added updated FNMANUAL.TXT file. FLEXNet
version 4.2.1B fixes the FMOUNT problem discovered by Don
Coates.
|
|
FLEXNet 4.2.1C |
Same as above with added ability to specify a
config file number to use (file must be called fncfgX.ini where
X is the number specified on the FLEXNet command line.
|
|
Command Line DSK file
Cataloger |
This one will produce a text listing to the console of your
.dsk file (both FLEX and OS9). Use command line redirection to
save output to a file. It also handles recursion into the PC
directory structure.
|
|
|
Televideo 950 Terminal Emulator for
DOS |
Provides terminal emulation for the Televideo 950 terminal
in DOS. Use command line options of -c=<com port> and -b=<baud
rate> ALT-F10 exists the program.
|
|
|
Televideo 950 Terminal Emulator
for W32 |
Provides terminal emulation for the Televideo 950 terminal
in Windows 32 bit. Use command line options of c=<com port> and
b=<baud rate> ALT-F10 exists the program. |
|
| |
|
|
Java based 6809 emulator
|
Copyright (C) 2001-2002 Sun-Cheung Wong
Ryerson University
School of Computer Science
All Rights Reserved.
|
|
|
J6809
(clicking this link will just allow you to download the .jar
file) |
Just the
Instructions from the way-back machine
clicking on
this link
will start the modified java applet if you have java hooked into your
browser and you have java applet execution enabled on your
machine. (The modifications that I made are to bring it up to
date with the JVM and to put
it into the applet window on the next page.)
|
|
Other Files
|
|
|
|
Active Hardware
Object binary(86128 bytes) |
Active Hardware Object
Binary |
|
Active Hardware Object
source (240146 bytes) |
Active Hardware Object Source |
| |
|
|
| Disk Images |
|
|
6800 FLEX 2.0
|
|
|
|
6800 C
Compiler with source (53,178 bytes) |
Ron Cain's Small C
compiler |
|
TSC
6800
Assembler with source (22,489 bytes) |
|
|
|
Fixes to
the Files in the FLEX6800 Directory |
These are the fixes for the damaged files that were
discovered in the FLEX6800 disk image directory of the SWTPCemu
Install. The new Installer already has these fixes. |
|
| |
|
|
6809 FLEX 9
|
|
|
|
PL9_MACE
(683,714 bytes) |
This is the one I used to use
in drive 0 |
|
FLEX292F |
Now I use this one. It has the memory scan
routine fixed to leave FLEX in the first 64K of memory on
systems that have more than 64K. It also contains all of the
useful stuff from the PL9_MACE diskette plus the ved editor
ported to 6809 FLEX. THE IO Package in the FLEX.SYS file has
been moved to $F000 (hence the name FLEX292F).It also has the
useless printer jump table removed from the stack area. In order
to use this version on real hardware, RAM must be installed in
the $F000 socket on the processor board. |
|
Anderson Utilities (28,804 bytes)
|
Ron Anderson's utilities |
|
Dragon Archives
(977,743 bytes) |
15 disks of C code |
|
Introl 6809 C
Compiler (142,609 bytes) |
version 1.50 |
|
Taylor
Utilities (147,571 bytes) |
Leo Taylor's
utilities |
|
Whimsical
Compiler (156,529 bytes) |
John Spray's compiler |
|
Winchester
Source (107,966 bytes) |
Leo Taylor Winchester routines |
|
HIER
Boot Diskette image (700,639 bytes) |
Hier installed for SWTPc emulator |
|
Fixes to
the Files in the FLEX6809 Directory |
These are the fixes for the damaged files that were
discovered in the FLEX6809 disk image directory of the SWTPCemu
Install. The new Installer already has these fixes. |
|
|
Fixes to
the Files in the OS9_6809 Directory |
These are the fixes for the damaged files that were
discovered in the OS9_6809 disk image directory of the SWTPCemu
Install. The new Installer already has these fixes. |
|
|
ved (vi like editor) - click
here for description |
unix vi like editor complete with source. |
|
|
RBASIC from Micronics
Research Corp |
This is the long awaited release from Micronics Research
Corp of the great RBASIC compiler complete with source listing.
This package was provided by Bob Jones (the author of RBASIC)
through the efforts of Frank Wilson and Ron Anderson. Thanks
guys. |
|
| |
|
|
|
CUG Files
|
|
|
| |
|
|
6809 C Compiler for
FLEX |
A rewrite of Ron Cain's Small C targeted for 6809 processors running
under the FLEX operating System. Dieter Flunker (Italy), has expanded
slightly on the language subset implemented by Cain and includes
a peephole code optimizer
|
|
6809 C Compiler for
MS-DOS |
By Brian Brown (New Zealand). Port of CUG221 6809 C
for FLEX to MS-DOS. Modifications allow the program to run with
ASxxxx assembler (CUG292), as well as with Motorola AS9 assembler.
The program also generates ROMable code. The disk includes a
complete set of C source code, well-written documentation, and a
run-time library such as routines for controlling the ACIA serial
port, functions for character handling and data conversion between
character strings and integers, routines for controlling a Hercules
card, routines for a magnetic card reader, memory |
|
|
|
| |
|
|
| UniFLEX Archives ...
When WinZip asks what type of file it is, the answer is
tar. |
|
|
Source
|
|
|
|
C-Compiler
|
Description |
|
Cobol-Compiler |
Description |
|
Cobol-IO |
Description |
|
CommStuff |
Description |
|
DiskRepair |
Description |
|
Documents |
Description |
|
Editor-LineEditor |
Description |
|
Editor-USEditor |
Description |
|
FLEX-4-UniFLEX |
Description |
|
Fortran-77 |
Description |
|
Lib-Gen |
Description |
|
Link-Edit |
Description |
|
Miscelaneous |
Description |
|
Pascal-Compiler |
Description |
|
RelAsmb |
Description |
|
SortMerge |
Description |
|
Terminals |
Description |
|
UniFLEX_Common |
Description |
|
UniFLEX_Core |
Description |
|
UniFLEX_Docs |
Description |
|
UniFLEX_FromSWTPc |
Description |
|
UniFLEX_GMX_01 |
Description |
|
UniFLEX_GMX_02 |
Description |
|
UniFLEX_GMX_03 |
Description |
|
UniFLEX_Kernel |
Description |
|
UniFLEX_STD_Utils1 |
Description |
|
UniFLEX_STD_Utils2 |
Description |
|
UniFLEX_STD_Utils3 |
Description |
|
UniFLEX_Structures |
Description |
|
UniFLEX_SWTP_01 |
Description |
|
UniFLEX_SWTP_02 |
Description |
|
UniFLEX_SWTP_03 |
Description |
|
UniFLEX_SWTP_04 |
Description |
|
UniFLEX_SWTP_05 |
Description |
|
UniFLEX_SWTP_s12 |
Description |
|
UniFLEX_SWTP_s13 |
Description |
|
UniFLEX_SysAcctPkg |
Description |
|
UniFLEX_UtilsI |
Description |
|
UniFLEX_UtilsII |
Description |
|
UniFLEX_VSAM |
Description |
| |
|
|
| Misc |
|
|
|
Environment |
|
|
|
Install |
|
|
|
MacDefs |
|
|
|
Notes |
|
|
|
Notes
v107 |
|
|
|
Params |
|
|
|
Plan File |
|
|
|
PWInstall |
|
|
|
Struct |
|
|
|
SysTabs |
|
|
|
Title |
|
|
|
Variables |
|
|
|
Vectors |
|
|
|
VersionPat |
|
|
|
|
|
| |
|
|
Copyright © 1997 - 2009